Chemical Engineering Site

Test Your knowledge on Steam Turbines – Online Quiz

chemicalengineeringsite

Steam Turbines find a wide range of use in Chemical Process Industry and power plants. The advantages of steam turbine include High-Speed Operation, Variable speed application, Use in Hazardous gas applications, High Reliability, Suits the plant steam balance and thus helps in process heat recovery etc. Power plants use steam turbines to produce electric power while the process plants use them to drive equipment like Pumps, Compressors in order to find the better use of heat energy.

This Online Quiz on Steam Turbines helps you to analyze your strengths and weaknesses. Let us take the test now.

1. 

In Impulse Turbine, Nozzle is 

2. 

A velocity compounded stage is also called as 

3. 

Steam Rate of the turbine is expressed in 

4. 

Overspeed of the Steam Turbine occurs when 

5. 

For Which Type of Steam Turbine Steam Rate is low? 

6. 

Erosion in Steam Turbine occurs due to 

7. 

In case of Load Variation in Condensing Turbine, it affects how many Steam Levels? 

8. 

For same power output, the Capital cost is high for 

9. 

In Multi Stage Turbines, Balance Piston reduces the load on 

10. 

Over Speed Setting of the Turbine is 

11. 

Isentropic Efficiency of Steam Turbine is calculated by 

12. 

The Efficiency is Low for 

13. 

Which one of the following is useful in calculating the efficiency of Steam Turbine? 

14. 

API standard for General Purpose Steam Turbines is

15. 

As per API 611, General Purpose Steam Turbine speed is limited to 

16. 

Slow Roll is recommended for 

17. 

Recommended Minimum Service Life of the General Purpose Steam Turbine is 

18. 

Electronic Over speed Trip of the Turbine is set at 

19. 

Gland sealing is not required for 

20. 

Maximum allowable bearing oil outlet temperature is 

21. 

The steam Turbine rotor is made up of 

22. 

Shaft Seals are used to 

23. 

Blade seals are used to

24. 

The purpose of using Turbine Turning Gear is 

25. 

In a Special Purpose Turbine Shaft End Seal used is

26. 

Multi Valve Turbines are used for 

27. 

The purpose of Nozzle box is to 

28. 

During Start up Turbine Exhaust Isolation Valve hat to be kept in 

29. 

What is Critical Speed in Steam Turbine? 

30. 

Commonly used Casing Type of Steam Turbine is 

Don’t miss our Cooling Tower Quiz, Compressors Quiz and Pump Quiz modules.

Exit mobile version